Audi TT Borla Exhaust Install
![]() | Name : Audi TT Borla Exhaust Install File Type : Size : 3453 KB |
Audi TT Borla Exhaust Install 9/10/05 The following directions are a suggestion; I take no responsibility for any damage caused to your car. Please take this as a guide, not the final word. Hope this helps someone Basic Tools Needed: Jack and Stands or- Two Jacks Ramps work great too. Big Flat Screw Driver Socket Wrench (3/8" or ½") 17mm socket 13mm socket Extension Bar WD-40 13mm wrench (Needed to get one bolt if you removing the center bracket) 0. Spray these bolts ( ) with WD40 as soon as you order your exhaust. This will help you out tremendously when you go to install you new system. 1. Start with a cool to the touch exhaust system. It only takes about 20min to reach temperature which is easily handled. Place ramps behind rear and back the car up. Set parking brake. 2. Start by loosening these two bolts ( ). Both bolts are 17mm. Ebook Relate: exhaust ebook bolts ebook borla ebook install ebook socket ebook borla exhaust ebook any damage ebook damage caused ebook your car ebook any damage caused ebook the following directions ebook borla exhaust install ebook |
| Server | Status |
| mysite.verizon.net | Alive |





